Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced Sensitive Electrochemical Sensor for Simultaneous Catechol and Hydroquinone Detection by Using Ultrasmall Ternary Pt-based Nanomaterial

The simple and effective method for the novel synthesis of Pt-based nanoparticle was presented with high efficiency. The sensitive catalyst for the simultaneous detection of catechol and hydroquinone was prepared by depositing ternary metal complex on fluorine-doped tin-oxide (FTO). The composition and morphology of nanomaterials were characterized by TEM, HRTEM, XRD, XPS, and EDS (energy dispersive spectroscopy). The size of the Pt-based nanomaterial was about 5±1 nm. The electrochemical performance of the modified catalyst was studied by CV, DPV, and EIS. The modified PtNiCu@FTO catalyst possessed good electro-oxidation activity for hydroquinone and catechol and used for simultaneous detection of catechol and hydroquinone at scan rate of 20 mV s⁻¹ (vs. Ag/AgCl). Detection responses were found in the ranges of 5–2900 μM for hydroquinone and 5–3000 μM for catechol. The detection limits (LOD) for HQ and CC were observed as 0.35 and 0.29 μM, respectively. The sensitivity of HQ and CC were 1515.55 and 1485 μA mM⁻¹ cm⁻², respectively. The prepared nanomaterial were effectively applied for the determination of CC and HQ in real samples.     

Structural Characterization of Graphene Nanosheets for Miniaturization of Potentiometric Urea Lipid Film Based Biosensors

The present article describes a miniaturized potentiometric urea lipid film based biosensor on graphene nanosheets. Structural characterization of graphene nanosheets for miniaturization of potentiometric urea lipid film based biosensors have been studied through atomic force microscopy (AFM) and transmission electron microscopy (TEM) measurements. UV‐Vis and Fourrier transform IR (FTIR) spectroscopy have been utilized to study the pre‐ and postconjugated surfaces of graphene nanosheets. The presented potentiometric urea biosensor exhibits good reproducibility, reusability, selectivity, rapid response times (～4 s), long shelf life and high sensitivity of ca. 70 mV/decade over the urea logarithmic concentration range from 1×10^?6 M to 1×10^?3 M.     

Measurement of <Superscript>99</Superscript>Mo production cross-section from the <Superscript>100</Superscript>Mo(n,2n) reaction with quasi monoenergetic neutron based on the <Superscript>9</Superscript>Be(p,n) reaction

The production cross-section of the medical isotope, ⁹⁹Mo from the enriched ¹⁰⁰Mo(n,2n) reaction with the average neutron energies of 21.9 and 26.5 MeV has been determined for the first time by using an off-line γ-ray spectrometric technique. The average neutron energies were generated by using the ⁹Be(p,n) reaction with the proton energies of 35 and 45 MeV from the MC50 cyclotron of the Korea Institute of Radiological and Medical Sciences (KIRAMS) at Seoul, South Korea. The ¹⁰⁰Mo(n,2n) reaction cross-section as a function of neutron energy was also calculated theoretically by using the computer code TALYS-1.8 and EMPIRE-3.2 Malta. The experimental results are in close agreement with the theoretical values from TALYS-1.8. However, the present data at the neutron energy of 21.9 MeV is slightly lower and at 26.5 MeV is higher than the values from EMPIRE-3.2 Malta.     

Solvent‐assisted anionic ring opening polymerization of glycidol: Toward medium and high molecular weight hyperbranched polyglycerols

Hyperbranched polyglycerols (HPGs) are globular structures with a large number of functionalizable hydroxyl groups and have excellent in vitro and in vivo biocompatibility profiles comparable to polyethylene glycol. This work introduces a facile method for the synthesis of medium molecular weights (M_ws) (50–300 kDa) HPGs, which has been difficult to synthesize with low polydispersity, with the assistance of solvents by ring opening polymerization. The influence of different solvents (1,4‐dioxane, tetrahydropyran (THP), ethylene glycol diethyl ether (EGDE) and decane), solvent to glycidol ratio, concentration of glycidol and the time of polymerization on M_w and polydispersity of HPGs has been studied. The M_w and polydispersity of HPGs are significantly affected by the nature of the polymerization phase (homogeneous or heterogeneous) and chemical structure of the solvent. The differences in the solvation of the potassium cations and change in the nucleophilicity of the alkoxide anion in various solvents may be responsible for the changes in M_w and PDI of the HPG. The M_w of the HPG decreases in the order 1,4‐dioxane > THP > EGDE >decane. The microstructure, solution and thermal properties of the HPG do not depend on the nature of solvent. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2614–2621